Do you know if the automatic backwash filter works well and what is the overall effect?
There are a variety of filters on the market today. We should check which product is better to choose so that we can perform better when using them. I believe many people know it themselves Automatic backwash filter 。 Would you like to know how to evaluate in the market? So when you choose, can you know if the effect is good and what is the overall effect?
The product itself has been well evaluated in the use process. Many people choose to use automatic backwash filters. They think that the filtering effect is very good and the market price is very reasonable, so everyone can choose. At that time, I knew if it was reasonable. At present, many people want to see the advantages of a specific use when choosing, so that they can choose with ease.
It seems that a lot of people still want to see the basic characteristics when choosing. We should have a better choice of full automatic backwash filter. You can also view the actual assessment of the consumer. If you give a good evaluation, you can naturally know that the filtering effect is very good when selecting, and some value meaning that can be brought is relatively high, that is, in this case, everyone also chooses to know the reasonable value when.
The water containing impurities enters the filter from the inlet, flows through the coarse filter screen for coarse filtration, and then enters the inner cavity of the fine filter screen for fine filtration, and the filtered purified water flows out from the outlet. The impurities filtered out are adsorbed on the fine filter screen, thus forming the pressure difference between the inner and outer surfaces of the filter screen. When the pressure difference reaches the set value, the pressure sensor sends a signal to the controller, and the controller opens the blowdown valve to discharge from the drain outlet. As a result, the pressure of the hydraulic motor cavity, impurity collector and chamber will drop, resulting in negative pressure suction and filter surface similar to vacuum cleaning principle With the backwashing water, the impurities are discharged to the sewage chamber through the sewage collector and hydraulic motor, and then discharged through the blowdown hole. The drain rotates the hydraulic motor and debris collector to flush the entire screen. The large filter also has a driving cylinder to control the longitudinal movement of the impurity collector and prevent it from moving too fast, so that the whole filter screen can be washed by the nozzle. The whole backwashing process is automatically controlled, only a few seconds, and the main water flow will not be interrupted in the self-cleaning process.